Omron S8FS-G03024CD — 30 W 24 VDC DIN-Rail PSU
SKU: S8FS-G03024CDUSD 38.00
Compact 30 W DIN-rail supply providing 24 VDC at 1.5 A through front-facing screw terminals.
1-Year Warranty
Full manufacturer warranty
Global Shipping
Worldwide delivery available
Genuine Omron
100% authentic product
Ready to Ship
Usually ships within 24h
In Stock
This item is available for immediate shipment from our warehouse.
Contact for pricing, bulk discounts, and shipping
Product Overview
The Omron S8FS-G03024CD provides 24 VDC for a small group of control devices inside a machine cabinet. It is the 30 W, 1.5 A model in the S8FS-G range. A perforated metal cover shields the supply while allowing natural cooling. The screw terminals face forward, so the input and load wiring remain easy to reach. This CD version clips to DIN rail and runs without a fan.
Where it fits
This model is a practical choice for sensors, relay coils, interface modules, or a compact controller whose combined load stays within its rating. It can also replace a small 24 VDC supply when the existing panel uses a low-profile, front-wired layout. A green DC ON light gives a quick local check, while the front adjuster allows limited correction of output voltage.
Choosing this variant
The nearby S8FS-G05024CD supplies more current and has a wider body. Choose it when 1.5 A leaves too little room for start-up demand or planned devices. The S8FS-G03024C has the same electrical rating but mounts directly to a panel. The D in this SKU matters: it is the DIN-rail version. Neither G030 model adds remote status contacts or communications.
Before ordering
Add the normal current of every connected load and check any brief demand when coils or other devices switch on. Confirm the available AC or DC feed is within Omron’s listed range. Check rail depth as well as face width because the mounting clip projects behind the body. Leave space around the vented case and check the reduced output limit if the cabinet runs hot. Do not plan to join two units in parallel for extra current; select a larger supply instead.
Key Features
- 30 W supply with 24 VDC, 1.5 A output
- 100–240 VAC rated input with allowed DC input
- Covered, fanless metal housing
- Front-facing screw terminals with terminal cover
- DIN-rail mounting
- Green DC ON light and output adjustment
- Operation up to 70 °C with load reduction
- SKU: S8FS-G03024CD
- Series: S8FS-G03024CD
- Voltage: 24 VDC
- I/O: 24 I/O
Best-Fit Applications
- Sensor and relay power in compact packaging-machine control boxes
- Auxiliary 24 VDC supply for small PLC and interface panels
- Replacement power for low-load machine sections using DIN rail
- Local control power in conveyor or assembly equipment enclosures
Buying Checklist
- Confirm the combined continuous load stays within 1.5 A.
- Check start-up demand for relays, valves, or other switched loads.
- Verify the cabinet feed is within the listed AC or DC range.
- Choose S8FS-G05024CD when 1.5 A leaves too little expansion room.
- Choose S8FS-G03024C when the supply must mount directly to a panel.
- Allow for rail depth, airflow, and any temperature or input derating.
Technical Specifications
| Power Rating | 30 W |
|---|---|
| Output Voltage | 24 VDC |
| Output Current | 1.5 A |
| Input Voltage | 100–240 VAC rated; 85–264 VAC or 80–370 VDC allowable |
| Construction | Covered, fanless |
| Mounting | DIN rail |
| Connection | Front-facing screw terminal block |
| Output Indicator | DC ON, green LED |
| Output Adjustment | -10% to +15% |
| Operating Temperature | -20 to 70 °C; derating applies |
| Overall Dimensions (W × H × D) | 82 × 36.2 × 117.7 mm |
Resources & Downloads
FAQ for S8FS-G03024CD
What is the difference between S8FS-G03024CD and S8FS-G05024CD?
The G030 model is the smaller choice for loads up to 1.5 A. The G050 model raises available current to 2.2 A and has a wider body. Both provide 24 VDC, use front-facing screw terminals, and clip to DIN rail. Choose the size by adding the normal load and room for planned additions.
Does the CD suffix on S8FS-G03024CD mean DIN-rail mounting?
Yes. In Omron’s S8FS-G lineup, CD identifies a covered model with DIN-rail mounting, and this exact SKU uses a screw terminal block. The S8FS-G03024C has the same power and voltage but is made for direct mounting. Check the full suffix when replacing an existing supply.
Can two S8FS-G03024CD supplies be connected in parallel?
No, not to increase available current. Omron marks parallel operation as unsupported for this model. Backup use needs matching supplies and the extra parts shown in the datasheet, and either unit must carry the full load alone. Choose a higher-rated supply when one unit is too small.
Similar Products
Explore related Omron models often viewed alongside this product.
